TPON Solar Water Pump Parts Machining Center

The bearing is installed in the bearing seat as a rotating part and only bears the thrust bearing of the axial load. At the same time bearing radial load and axial load is called radial thrust bearing.

Select high-quality stainless steel material, (has the advantages of anti-rust, corrosion resistance and abrasion resistance.)

New machine tool processing (processing accuracy can reach 0.003mm) to ensure the accuracy requirements of the parts, and the concentricity requirements are 0-0.05mm. In order to ensure the concentricity of the motor and the pump body, the stability and balance of the pump movement should be increased.

Its main function is to transfer the torque input from the engine to the impeller and fan, and provide the energy required by the impeller and fan to perform work.

Select high-quality stainless steel material, (has the advantages of anti-rust, corrosion resistance and abrasion resistance.)

The new processing technology ensures that the impeller structure is closely matched. Incorporating the pump shaft straightening process, any three surfaces of the hexagonal shaft are required to have no light transmission on the straightening platform. Strengthen the running stability of the pump body structure and reduce the noise of the pump body.

The function of the connection is to connect the pump body and the motor to ensure the stability and balance of the pump during operation; we also provide customers with two choices of stainless steel and copper materials.

Select high-quality stainless steel material, (has the advantages of anti-rust, corrosion resistance and abrasion resistance.)

New machine tool processing (processing accuracy can reach 0.003mm) to ensure the accuracy requirements of the parts, and the concentricity requirements are 0-0.05mm. In order to ensure the concentricity of the motor and the pump body, the stability and balance of the pump movement should be increased.

The finishing of the rotor shaft refers to the fine processing of the outer circle of the rotor shaft. This step is a key process to ensure the accuracy of the motor air gap and the performance of the motor. Any defects in this process will eventually manifest as uneven air gaps, which will seriously affect the performance of the motor.

Select high-quality 304 material, which has the advantages of anti-rust, corrosion resistance and abrasion resistance.

New machine tool processing (processing accuracy up to 0.003mm) to ensure that the rotor shaft processing accuracy requires 0-0.01, and the rotor shaft concentricity requirements (0-0.003mm). To ensure the smooth operation of the rotor and the accuracy of the motor stator air gap.

Precision grinder equipment (grinding accuracy can reach 0.0005mm), the processed rotor shaft is subjected to fine grinding (the bearing position of the shaft, the mechanical seal position, and the press-fitting part of the rotor blank are ground) to ensure the installation requirements of the rotor shaft (Bright and clean degree： 6 ), the mechanical seal of the rotor shaft is treated with a mirror finish (Bright and clean degree： 8). Ensure that the rotor shaft matches the mechanical seal. Prevent water from entering the inside of the motor.

Cooperate with the mechanical seal to seal the motor chamber, and combine with the lower bearing to fix the rotor of the motor, so that the rotor is in a reasonable working state. It is a key component of the water pump motor

Select high-quality stainless steel or iron materials,, (has the advantages of anti-rust, corrosion resistance and abrasion resistance.)

New machine tool processing to ensure the accuracy requirements of the parts. The size of the bearing position and the outer matching part (the concentricity is required to be 0-0.05mm), the bearing and the sealing part, (the concentricity is required to be 0-0.03mm, and bright and clean degree is required to be 6). In order to ensure the concentricity of the motor and the pump body, the stability and balance of the pump movement should be increased.

The bearing is installed in the bearing seat as a rotating part and only bears the thrust bearing of the axial load. At the same time bearing radial load and axial load is called radial thrust bearing.

The use of cast iron material, precision machining (fitting with the bearing +0.005/+0.012mm), makes the bearing seat and the bearing more reasonable, increases the service life of the bearing, and enhances the stability of the bearing operation.

Double bearing design (6 series bearings and 7 series bearings are used together), which can better receive the axial force of the water pump and enhance the stability of the water pump operation.